How To Make TOZO earbuds Louder

Let me guess, you just got a fresh pair of TOZO earbuds, cranked the volume all the way up, and still thought… “Wait, that’s it?” I’ve been in that exact situation, wondering if mine were defective or if I was missing something. So if you’re here searching for how to make TOZO earbuds louder, you’re not alone and no, you’re not imagining it.

Here’s the truth: TOZO earbuds can sound surprisingly quiet out of the box, depending on how they’re paired, what phone settings you’re using, or even how they fit in your ears. And if you’ve ever thought, “Why are my TOZO earbuds so quiet?” you’re asking the right question. The answer isn’t always obvious, but it is fixable.

I’ve tested these earbuds across Androids, iPhones, laptops, and even smart TVs and I’ve found real, practical ways to boost the volume significantly without blowing out your ears or the sound quality. I’ll walk you through every fix that’s actually worked for me. No generic advice just real solutions that’ll have your TOZOs performing the way they should’ve from day one.

Understanding Why Your TOZO Earbuds Are So Quiet

TOZO earbuds may sound quiet because of low device volume limits, poor ear tip fit, Bluetooth sync issues, or compatibility problems. Fixing these common causes is essential to restore full audio performance and achieve optimal sound clarity.

Common Causes of Low Volume in TOZO Earbuds

1. Low output from your device: Many smartphones and tablets restrict volume for hearing safety. Features like “Reduce Loud Sounds” on iPhones or volume limiters on Android can reduce maximum audio output to your TOZO earbuds.
2. Bluetooth volume synchronization issues: If your device and TOZO earbuds aren’t synced properly, the system volume might not reflect what you actually hear. This is especially common with Absolute Volume enabled on Android devices.
3. Incompatible or outdated hardware/software: Using older phones, outdated operating systems, or unsupported Bluetooth versions can prevent your earbuds from receiving a strong, clean audio signal.
4. Dirty or blocked speaker grills: Even a small amount of earwax or dust buildup on the mesh can muffle the sound dramatically. Regular cleaning helps preserve volume quality.
5. Improper ear tip fit: If the ear tips don’t form a good seal in your ear canal, much of the sound escapes. Try switching to a different tip size or material to ensure a tighter, more isolated fit.

Quick Fixes Before Troubleshooting Further

To make TOZO earbuds louder, start by cleaning the earbuds, checking volume settings, and updating firmware or apps. These quick fixes often resolve low volume issues instantly and help avoid deeper troubleshooting.

Step-by-Step: Quick Fixes to Improve TOZO Earbud Volume

1. Clean your TOZO earbuds properly: Sound can be muffled by earwax, dust, or debris blocking the speaker mesh. Gently wipe the earbud tips and speaker grills using a dry microfiber cloth or soft brush. Avoid using liquid cleaners, which can damage internal components.
2. Check phone or audio device volume settings: Double-check both the media and Bluetooth volume on your phone. On Android, disable “Absolute Volume” in developer settings for better control. On iPhones, go to Settings > Sounds & Haptics > Headphone Safety, and turn off “Reduce Loud Sounds.”
3. Ensure firmware and apps are up to date: Outdated firmware can cause connectivity and audio issues. Use the official TOZO app (if supported by your model) or check the manufacturer’s website for updates. Also, update audio apps like Spotify, YouTube, or Apple Music to the latest version.

How to Adjust Volume on TOZO Earbuds

To adjust volume on TOZO earbuds, use the touch controls on the earbuds, change the volume through your connected device, or adjust settings via the TOZO app if available. These methods help ensure optimal volume across different listening situations.

Step-by-Step: How to Adjust Volume on TOZO Earbuds

1. Use onboard touch controls

Most TOZO models (like the T6, T10, and NC9) include touch-sensitive volume controls. Typically, tapping the right earbud increases volume, while the left decreases it. Tap and hold functions may vary by model, so refer to your specific model’s manual.

2. Adjust volume through the connected device

Even if you’ve used the earbuds’ touch controls, your phone or tablet may still control the master volume. Make sure your media volume not just ringtone or call volume is turned up. On Android, you can access this by pressing the volume rocker and selecting media settings.

3. Check volume settings in the TOZO app (if available)

Some newer TOZO earbuds support the TOZO app, which may include a volume slider, EQ presets, or firmware updates that affect loudness. If your model supports the app, install it and explore the audio settings for more control.

Shop the Best Picks Below!

All products on Beats Insight are chosen by our experts independently, but we may earn a commission on purchases made through our links. See our full disclosure here.

Bang & Olufsen Beoplay EX
Premium ANC true‑wireless with waterproof fit and 20 hr playtime

Buy Now on amazon

Sennheiser Momentum True Wireless 3
Audiophile‑grade sound, next‑gen ANC, 28 hr battery

Buy Now on amazon

JBL Tour Pro 3
Dual‑driver hi‑res audio with Smart Charging Case and adaptive ANC

Buy Now on amazon

How to Make TOZO Earbuds Louder on Android

To make TOZO earbuds louder on Android, disable Bluetooth Absolute Volume in developer settings, adjust system volume manually, and use a trusted volume booster app if needed. These steps unlock higher audio output and improve volume control.

Step-by-Step: Increase TOZO Earbud Volume on Android Devices

1. Enable Developer Options
   • Go to Settings > About Phone.
   • Tap “Build Number” seven times to unlock Developer Options.
   • You’ll get a message saying Developer Mode is enabled.
2. Disable Bluetooth Absolute Volume
   • In Developer Options, scroll down and find “Disable Absolute Volume.”
   • Turn this setting on.
   • This lets you control the volume of your TOZO earbuds and your phone independently, which often increases maximum output.
3. Turn up all audio channels manually
   • Open the volume panel on your Android device.
   • Tap the settings icon and raise all available sliders: media, call, and Bluetooth volumes.
   • Make sure Do Not Disturb or audio-limiting features are off.
4. Use volume booster apps (with caution)
   • Apps like “Volume Booster GOODEV” or “Sound Amplifier” can temporarily enhance volume.
   • Be cautious: long-term use at high volumes can damage both your earbuds and your hearing.

How to Make TOZO Earbuds Louder on iPhone

To make TOZO earbuds louder on iPhone, adjust headphone safety settings, turn off the “Reduce Loud Sounds” feature, and customize EQ settings in Apple Music or Spotify. These quick changes allow your earbuds to reach their full volume potential.

Step-by-Step: Increase TOZO Earbud Volume on iPhone

1. Adjust Headphone Safety Settings
   • Open Settings on your iPhone.
   • Tap Sounds & Haptics, then select Headphone Safety.
   • Make sure “Reduce Loud Sounds” is turned off. This Apple feature limits headphone volume to protect hearing, but it can significantly lower audio output.
2. Manually raise volume sliders
   • Use the physical volume buttons to ensure the media volume is maxed out.
   • Also check Control Center > Volume slider, as iOS sometimes keeps separate volume profiles for different audio sources.
3. Customize EQ settings in Apple Music
   • Go to Settings > Music > EQ.
   • Choose an EQ preset like “Late Night”, which amplifies quieter sounds without distorting them.
   • This can help make your TOZO earbuds sound louder during music playback.
4. Adjust volume in third-party apps (like Spotify)
   • In Spotify, go to Settings > Playback > Volume Level and choose “Loud”.
   • Make sure audio normalization settings are not suppressing the output.

If you’re using an iPhone, your earbuds might be limited by built-in safety features. To fix this, go to your Headphone Safety settings and turn off “Reduce Loud Sounds.” You can follow Apple’s official guide for step-by-step instructions.

Boosting Volume via Third-Party Apps and Equalizers

To make TOZO earbuds louder using third-party apps, install an equalizer app on your Android or iPhone, apply a volume-enhancing preset, and adjust frequencies carefully to avoid distortion and hearing damage. These apps help maximize volume beyond default device limits.

Step-by-Step: Using EQ Apps to Boost TOZO Earbud Volume

1. Download a reliable equalizer app
   • For Android, top-rated apps include Wavelet, Poweramp Equalizer, and Flat Equalizer.
   • On iOS, try Boom: Bass Booster & Equalizer or EQ Player.
   • Always choose apps with high ratings and regular updates for best performance.
2. Apply volume-enhancing EQ presets
   • Look for built-in presets like “Loudness,” “Rock,” or “Bass Boost.”
   • These profiles raise key mid and high frequencies, making vocals and instruments sound clearer and louder.
3. Customize EQ settings manually
   • Increase the 1kHz–4kHz range to make vocals pop.
   • Boost the 60Hz–100Hz range carefully for stronger bass.
   • Avoid maxing out every band this leads to distortion and poor sound quality.
4. Avoid distortion and protect your hearing
   • Don’t rely solely on EQ to fix volume clean your earbuds and check fit first.
   • Use volume enhancement moderately, especially if you listen for long periods.
   • Apps that artificially raise volume can increase risk of hearing fatigue or long-term damage.

Troubleshooting Persistent Volume Issues

If your TOZO earbuds still sound quiet after basic fixes, reset them to factory settings, test them on another device, and inspect for water or hardware damage. These steps help identify deeper issues that may affect volume or audio clarity.

Step-by-Step: How to Fix Persistent TOZO Earbud Volume Issues

1. Reset TOZO earbuds to factory settings

• Place both earbuds in the charging case.
• Press and hold both touch controls for about 10 seconds or until the LED indicators flash red and blue.
• This clears previous pairings and resets the earbuds to default, which often resolves volume glitches.

2. Test the earbuds on another device

• Pair the TOZO earbuds with a different phone, tablet, or laptop.
• If the volume is normal on the second device, the original device settings may be the issue.
• This step helps isolate whether the problem is with the earbuds or the device.

3. Inspect for physical or water damage

• Examine the earbuds for signs of moisture, corrosion, or impact damage.
• If one earbud is significantly quieter than the other, internal speaker damage may be to blame.
• In such cases, contact TOZO support or consider a replacement if still under warranty.

Are Your TOZO Earbuds Too Quiet During Calls?

If your TOZO earbuds are too quiet during calls, the issue may be due to separate call and media volume settings, mic-speaker limitations, or app-specific audio controls. Adjusting these individually can help restore normal call volume and clarity.

Step-by-Step: Fix Quiet TOZO Earbud Volume During Calls

1. Understand call vs. media volume differences

Call audio and media audio are controlled separately on most smartphones. Your earbuds may sound fine for music but still be quiet during calls because the call volume is lower. Always adjust call volume during an active call for it to take effect.

2. Manually raise the call volume

While on a phone call, press the volume-up button on your device. This adjusts the in-call audio level independently of media volume and often resolves quiet call issues.

3. Check mic and speaker functionality

A damaged or obstructed speaker grill in one earbud can affect call audio. Try switching earbuds during the call or using the phone’s speaker to compare sound clarity.

4. Adjust app-specific audio settings

Apps like Zoom, WhatsApp, and Google Meet often have their own audio controls. Open the app settings and ensure audio output is set to “Bluetooth” or “headset.” Also, check if the app is limiting volume for voice calls.

5. Test the earbuds with another call platform

If TOZO earbuds sound quiet in one app but not another, the issue is likely software-based. Reinstall the app or update it to the latest version to fix bugs affecting volume.

How to Fix Quiet TOZO Earbuds After Firmware Update

If your TOZO earbuds became quiet after a firmware update, check the release notes for known audio bugs, reinstall the update if available, or contact TOZO support for possible rollback options. These steps can restore normal volume and fix post-update audio issues.

Step-by-Step: Fixing TOZO Earbud Volume Issues After Firmware Update

1. Check the firmware release notes
   • Visit TOZO’s official website or the support section of the app (if applicable).
   • Look for any mention of volume-related bugs, changes to audio profiles, or performance adjustments.
   • If an issue is acknowledged, TOZO may be working on a patch.
2. Reinstall or refresh the firmware
   • If your earbuds support app-based firmware updates, try reinstalling or resetting the latest version.
   • This can resolve corrupted files or installation glitches that affect audio performance.
   • Make sure your device is fully charged and stable during the process.
3. Contact TOZO customer support
   • If the problem persists, reach out to TOZO via their official website or Amazon support page.
   • Ask if a rollback is possible or if a new firmware update is being released to address the issue.
   • Provide details like your model number and firmware version to expedite help.

Why Are My TOZO Earbuds So Quiet Even at Full Volume?

If your TOZO earbuds are quiet even at full volume, the cause may be low-quality audio files, volume restrictions within streaming apps, or wireless interference. Identifying and correcting these issues can significantly improve your earbuds’ sound output.

Step-by-Step: Fix TOZO Earbuds That Are Quiet Even at Maximum Volume

1. Check the quality of your music source
   • Low-bitrate MP3 files or compressed audio can sound flat and quiet, even at full volume.
   • Try streaming or downloading music in higher-quality formats like FLAC or 320kbps MP3 for better dynamic range and volume.
2. Adjust volume settings in streaming apps
   • Apps like Spotify, Apple Music, and YouTube often have built-in volume controls and normalization features.
   • In Spotify, go to Settings > Playback > Volume Level and select “Loud.”
   • Turn off audio normalization features that can cap the output level.
3. Reduce wireless interference
   • Signal interference from other Bluetooth devices, Wi-Fi routers, or physical barriers can weaken the audio stream.
   • Stay within 10 feet of your device, minimize nearby wireless traffic, and avoid placing your phone in a pocket or bag during playback.
4. Restart both device and earbuds
   • Sometimes, restarting your smartphone and resetting the Bluetooth connection can resolve temporary glitches affecting volume.

Tips to Maintain Long-Term Volume Performance

To maintain long-term volume performance on TOZO earbuds, clean them regularly, store them properly, avoid moisture exposure, and use the charging case correctly. These small habits can significantly extend sound quality and lifespan.

Step-by-Step: How to Keep TOZO Earbuds Loud and Clear Over Time

1. Clean your earbuds regularly
   • Wipe the speaker mesh and silicone tips with a dry microfiber cloth after each use.
   • Gently remove earwax buildup using a soft brush or cotton swab.
   • Avoid using liquids or alcohol, which can damage internal components.
2. Store earbuds in the charging case when not in use
   • Leaving them out exposes them to dust and humidity, which can clog sound ports.
   • Always dock them into the case properly so the connectors stay clean and the earbuds recharge evenly.
3. Avoid sweat and water exposure
   • Even with water resistance ratings, excessive sweat or accidental splashes can affect speaker sensitivity over time.
   • After workouts, wipe the earbuds dry before placing them back into the case.
4. Handle with care during charging and transport
   • Don’t force earbuds into the case or pockets with lint or debris.
   • Regularly check the case contacts to ensure consistent charging, which affects audio performance indirectly through battery health.

When to Replace Your TOZO Earbuds

You should replace your TOZO earbuds when audio quality degrades, battery life shortens significantly, or physical wear affects sound performance. If your earbuds are out of warranty and repairs aren’t possible, upgrading to a new pair may be the best option.

Step-by-Step: Know When It’s Time to Replace TOZO Earbuds

1. Watch for signs of sound deterioration
   • Muffled audio, unbalanced channels, or crackling sounds during playback often indicate aging internal components.
   • If you’ve cleaned the earbuds and tried troubleshooting with no improvement, it may be time for a replacement.
2. Check for battery and charging issues
   • If your TOZO earbuds no longer hold a charge or die quickly, the internal batteries may be wearing out.
   • Battery degradation is common after extended use and often affects audio output and connection stability.
3. Inspect for physical damage or wear
   • Look for cracked casings, worn-out ear tips, or damaged speaker grills.
   • Even small cracks can let in moisture or dirt, which can damage the drivers or affect volume quality.
4. Review warranty and support options
   • If you’re still under warranty, contact TOZO customer support for a replacement or repair.
   • If your warranty has expired, consider upgrading to a newer model for better sound, battery life, and app compatibility.

FAQs:

Q. Can I use third-party ear tips to improve TOZO earbud loudness?

Yes, using third-party ear tips can improve TOZO earbud loudness. A better fit creates a stronger seal in the ear, which boosts sound isolation and volume. Memory foam tips often provide a tighter, more comfortable fit than the stock silicone tips.

Q. Are there TOZO models that are louder than others?

Yes, some TOZO models offer louder output. Models like the TOZO T12 and TOZO NC9 typically have stronger drivers and better volume range than entry-level options. Always compare sound specs, such as driver size and codec support, before buying.

Q. Is it safe to boost TOZO earbud volume above factory limits?

Boosting volume above factory limits can be risky. It may damage the earbuds over time and increase the risk of hearing loss. Use volume booster apps or EQ settings with caution, and never listen at high volume for long periods.

Conclusion:

Making your TOZO earbuds louder doesn’t have to be complicated. Whether it’s adjusting volume settings, improving the ear tip fit, or tweaking your device’s audio settings, small changes can lead to a big difference. Always balance loudness with clarity and safety—and if issues persist, it may be time for a replacement. With the right approach, you’ll get the full, immersive sound your TOZO earbuds were built to deliver.

Want more volume-boosting ideas beyond TOZO earbuds? This complete guide on how to make headphones louder covers universal fixes that work for most brands and devices.